editorinchief@ijrtmr.com +91 9840521421 Scholarly Open Access, Peer-reviewed, Refereed Journal e-ISSN 2583-0368 Since 2021
  1. Home
  2. Conference
  3. ICISDG’23
  4. Article
Research Article

A Wide Conversion Ratio Bidirectional Modified SEPIC Converter with Non dissipative Current Snubber

  • ICISDG’23
  • Volume 4, Issue 2
  • Pages 31-38
  • Published Online: 2023
Open Access Peer Reviewed

Authors

  • R.Selciya1
  • V.K.Rakesh2
  • E.A.Harini3
  • L.Chitra4

1 2 3 Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering and Technology, India. 4 Associate Professor, Electrical and Electronics Engineering, Dr. Mahalingam College of Engineering and Technology, India.

Article Information

DOI
No DOI
Organised By
Project Contest Innovations LLP
Conference Date
Session1:09.04.2023 & Session2:01.05.2023
Pages
31-38
Article Type
Research Article
Check for updates
No DOI available for cross-reference

Abstract

View PDF

This article presents a wide conversion ratio bidirectional dc-dc converter based on a bidirectional modified Single-ended primary-inductor converter (SEPIC converter). A key feature of this modified SEPIC converter is the non-dissipative current snubber circuit, which is used to achieve zero current switching and to suppress voltage spikes that occur during MOSFET switching. The snubber is made up of a capacitor, an inductor, and a diode that work together to form a resonant circuit that absorbs the voltage spike and returns it to the circuit without dissipating it. Even with conventional MOSFETs, high efficiency is achieved. The SEPIC converter differs from other bi-directional DC-DC converters in that it provides continuous output current, has fewer components, and can provide high conversion ratios of step-up and step- down voltage without exceedingly low or high duty-cycle. This paper presents a theoretical analysis with stages of operation in both step-up and step-down modes, theoretical waveforms, and the design procedure, as well as a comparison with other bidirectional dc-dc converter topologies. The experimental results are presented to validate the performance of the proposed converter using a 500-W prototype with Voltage Source V1 = 48 V and Voltage SourceV2 = 300 V.

APC from ₹1200 + 18% GST

Peer-reviewed open access₹1200 Indian (₹1400 with DOI)$80 USD internationalpaid after acceptance Peer-reviewed open access₹1200 Indian$80 USD international ₹1200 Indian · $80 intl

  • CrossRef DOI
  • ISSN 2583-0368
  • Open Access
  • Peer Reviewed
  • Plagiarism Checked
  • Google Scholar
Submit Paper